Foundation 60x60 cm RR masonry with cement mortar, DPC 15 cm thick RCC 1:3:5 ratio. RR Foundation work 60cm x 60cm fitting and packing of Rubble with available soil. RR Basement 45cm x 45cm fitting and packing of Rubble in cement mortar 1:6 as per standard architectural specification. Reinforced Cement Concrete in 1:2:4 as per architectural drawings, size shall be 45 x 10 as per standard architectural specification. Cement Bricks is used for entire structure. Single Brick Work shall be used for the Parapet Works.

Hi Gloss Nano Technology 60cm x 60cm Vitrified (Kajaria/ Somany /Nitco/RAK Tiles shall be used for all flooring Areas; except bathrooms.

Main door frames and shutters to be with teak wood frame size (25cmx7.5cm) and shutter of standard thickness. Shutter design will be completely based on architect’s decision. All internal doors & frames will be of anjili wood and branded fero doors or equivalent. All internal and external faces shall be with mat laminated finish. All door locks will be provided based on architect’s decision. In case of client prefers to purchase doors of any other specifications, other than that mentioned in our company scope (material to be equivalent or of higher makes / brand); the client needs to pay only the excess amount from the amount already paid by the client.

All windows will be in anjili wood frames and Teak wood shutters with grill design based on architects’ decision. Design of window will also be based on Architects decision. The final cost of windows will be deducted from the amount given by the client after completion of all window fittings.

Good Quality and standard Glazed Tiles Shall be used for all Da Doing works in the kitchen area. Good Quality Granite Black Galaxy Slabs Shall be used for the Kitchen Top.

Putty works shall be done in all the interior and exterior area. (Brand: Asian, Berger or JK Wall Putty). Single Coat White Cement Washing shall be used all over the Plastered Area, Two Coats of Acrylic Emulsion shall be used all over the white washing Area including one coat of Cement Primer. Asian’s Apex brand shall be used for all external walls and Asian’s regular emulsion shall be used for all internal walls.

Good quality anti-skid tiles shall be used for all bathrooms up to celling height (Choice of colour & pattern as per the client) Size: 30 x 30 Cms. Good quality bathroom wall tiles (Size: 45 x 30 Cms) of High lighter Model shall be Used. All Bathroom Doors shall be made with imported flush Doors.

Concealed point wiring with ISI mark PVC insulated copper cables, modular switches, 6/16amp socket with ELCB and MCB with wiring for inverter supply, telephone point and cable point in living room and master bedroom.AC point in Master bedroom Cables: V-Guard, Finolex, Havells or Equivalent Switches & Sockets: Modular Switches & Sockets from Legrand, Honey well, Havell’s or equivalent. Any surplus requirements of switches & sockets shall be charged additional. Electrical provisioning and cabling for Closed Circuit Cameras (CC CAMS) & sensors shall also be charged additionally. Additional cost will be charged for three –phase connection.

Outside Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM thick. Inside plastering work shall be in cement mortar 1:6, 9 to 12 MM thick and ceiling shall be in 1:3 Cement Mortar, below 10MM thick.

Stainless Steel handrails shall be used in staircase areas and upper living cut-off areas.

Independent Well.

Complete plumbing and sanitary works shall be executed by the Contractor; Using the below mentioned Brands PVC Pipes: Star, Balco, Sentini, Supreme, and CP Fittings is of Cera or Equivalent Sanitary Fittings: Cera or Equivalent Sanitary: Single Unit Imported Closet and Half Pedestal Wash Basin from Cera or Equivalent. Water Tank: Aqua-Tech, Sintex or equivalent Quality of 750 Liter Capacity Kitchen Sink: 24 x 18 Sink for Kitchen and 18 x 16 Sink for Work Area (Brand: Diamond) Septic Tank: Septic tank to be provided with prefabricated RCC rings as per requirement.